PRODUCT CENTER
NANOTUBE ANTICORROSIVE MATERIAL (SG-E500)
Pipeline anti-corrosion nanomaterials are the latest developed new nanomaterials, which can be widely used in petroleum, petrochemical pipelines, municipal, gas pipelines and all kinds of steel chemical storage tanks.
The material does not contain organic solvents and other volatiles and fully meets the drinking water grade standard, and has been discussed in the "Sanitary Safety Evaluation Code for Drinking Water Transmission and Distribution Water Equipment and Protective Materials" and the "Drinking Water Standard Inspection Party", and has obtained the British WRAS certification.
keyword：system
Category:
Coatings (including special coatings)
Message
Product description
| Item | Performance index |
| Solid content (%) | 100 |
| Gel time (S) | 20 |
| Tensile strength (MPa) | 26 |
| Elongation rate (%) | 45 |
| Tear strength (N/mm) | 81 |
| Adhesion (steel, MPa) | 15 |
| Wear resistance 【 (750g/500r),mg】 | 25 |
| Liquid resistant medium | No rust, no foaming, no shedding |
| Salt spray resistance (2000hrs) | No rust, no foaming, no shedding |
| Impact resistance (kg·m) | 1.5 |
| Electrical Strength (Mvm) | 26 |
| Hardness (Shao A) | 65-75 |
| Resistance to cathode stripping (mm) | 8 |
| Artificial weathering (2000h) | good |
| Density (g/cm3) | 1.01 |
| Colour | Can be modulated according to user requirements |
Note: The above parameters can be sprayed with GRACOH-X3 host and AP spray gun under laboratory conditions and tested for physical properties after curing at room temperature for 7 days. Due to differences in site conditions, the actual measured data on site may differ from the above data.
Related products
Enquire now
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!