PRODUCT CENTER
Nanometer waterproof and anticorrosive material (SG-T300)
The product is constructed with special spraying equipment of GRACO Company in the United States, and the coating is cured instantly to form a high-strength, high-elongation, jointless dense waterproof coating, which can be widely used in large-scale building structures, chemical infrastructure, water conservancy and other waterproof projects, especially suitable for use in projects containing chemical corrosive water quality.
keyword：system
Category:
Coatings (including special coatings)
Message
Product description
| Item | Type I | Type II |
| Solid content | 99 | 99 |
| Gel time (S) | 20 | 20 |
| Surface drying time (S) | 40 | 40 |
| Tensile strength (MPa) | 18 | 22 |
| Elongation rate (%) | 375 | 510 |
| Tear strength (N/mm) | 66 | 70 |
| Hardness (Shao A) | 85-95 | 85-95 |
| Low temperature flexability /℃ | -35 | -40 |
| Impact resistance (kgm) | 1.0 | 1.0 |
| Wear resistance 【 (750g/500r),mg】 | 30 | 25 |
| Water impermeability/(O.4MPa, 2h) | impermeable | impermeable |
| Water absorption rate /% | 2.5 | 2.5 |
| Adhesion (MPa) | 2.5 | 3.5 |
| Artificial weathering (2000h) | good | good |
| Density (g/cm3) | 1.02 | 1.02 |
| Colour | Can be modulated according to user requirements | |
Note: The above parameters can be sprayed with GRACOH-X3 host and AP spray gun under laboratory conditions and tested for physical properties after curing at room temperature for 7 days. Due to differences in site conditions, the actual measured data on site may differ from the above data.
Related products
Enquire now
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!