PRODUCT CENTER
Nanotube anticorrosive material (SG-D100)
Protective nanomaterials of sculpture props are directly sprayed on EPS or other brittle foam surface to form a hard protective layer, which plays a waterproof, wear-resistant, bumping protection and decorative role. It has the advantages of good shape reproducibility, strong adhesion, light weight, good weather resistance and high production efficiency.
The material can be widely used in all kinds of indoor and outdoor playground props surface, it has the advantages of good elasticity, good feel, anti-bump and so on.
keyword：system
Category:
Coatings (including special coatings)
Message
Product description
| Item | Performance index |
| Solid content | 100 |
| Gel time (S) | 20 |
| Tensile strength (MPa) | 26 |
| Elongation rate (%) | 45 |
| Tear strength (N/mm) | 83 |
| Hardness (Shao A) | 65-75 |
| Electrical strength (Mv/m) | 26 |
| Impact resistance (kg·m) | 1.0 |
| Wear resistance 【(750g/500r),mg】 | 25 |
| Density /(g/cm3) | 1.01 |
| Liquid resistant medium | No rust, no foaming, no shedding |
| Artificial weathering (2000h) | good |
| Colour | Can be modulated according to user requirements |
| Flammability（DIN4102PART1) | B2 |
Note: The above parameters can be sprayed with GRACOH-X3 host and AP spray gun under laboratory conditions and tested for physical properties after curing at room temperature for 7 days. Due to differences in site conditions, the actual measured data on site may differ from the above data.
Pre
Related products
Enquire now
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!